Hot Sale for Film Intercalaire Pvb - Light blue B113 / Opaque light blue B102 / Ford blue B118 / Ocean blue B105 – Baizan

Short Description:


Product Detail

Related Video

Feedback (2)

As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Pvb Film Laminate, Pvb Polyvinyl Butyrate, White Pvb, Please don't hesitate to contact us if you are interested in our products. We firmly believe our products will make you satisfied.
Hot Sale for Film Intercalaire Pvb - Light blue B113 / Opaque light blue B102 / Ford blue B118 / Ocean blue B105 – Baizan Detail:

Use Process

Baizan color pvb film for architecture glass

Productivity>12000t per year
Color pvb MOQ>5000 sq.m.
Payment term:TT LC DP
Delivery:5-10days
After-sale service:We will follow customer’s testing result, and if there is a problem, we will check it out at site.
Glass Cutting Glass Cleaning and PVB Film Cutting
● Properly cut the glass at precise size
● Check glass surface and remove grease and dusts, clean the glass by tap water.
● Rinse the glass by demineralized water/Softened water. Water quality<30μS, water hardness<10 PPM, temperature is 40~60℃.
● Air dry the glass and keep it away from pollution.
● PVB film should be cut at size of bigger than 2~5mm extra than glass size.

Lamination
Lamination room — The temperature in lamination room should be 20~25℃,the humidity should be 23%±2%,dusts proof, keep the machinery tidy, workers should keep the tidy uniform, hat and grove to prevent PVB film from dusts, contaminates and hair.

Lamination conditions:
a)The glass surface temperature—20~30℃, the upmost should not over 40℃.
b)The PVB film temperature—20~25℃.
c)Check again the PVB film and glass is tidy and the glass size properly match the PVB film size.

Pre-Pressure Exhaustion
Cold vacuum and hot vacuum
a)Cold vacuum — Compression vacuum degree should be at 580~680mmHg, temperature at 20~25℃, pressure at -0.095~-0.1MPa. It takes around 20 minutes in Continuously Cool Pumping, while 30 minutes in Un-continuously Cool Pumping.
b)hot vacuum — The glass surface temperature should be at 100~120℃, it takes 30~45 minutes, pressure should be at -0.095~-0.1MPa. The glass can be taken out when the temperature decreases to 60~80℃.

Rolling Exhaust:
a)First thermostat —→ The heated Laminated Glass surface temperature is 30~40℃ —→ First roller, pressure is 5~8Mpa, the roller distance should be 1-2mm less than Laminated glass thickness —→ Second thermostat —→ the laminated glass surface temperature is 65~80℃, the pressure is 5~8Mpa, the roller distance is 2-3mm less than laminated glass thickness.
b)Keep the thermostat temperature by continuous work.

High Pressure Formation
The temperature and pressure rising is at low speed during whole procedure. The procedure below for reference:

Raise temperature and pressure—→Temperature rise to 60℃, Pressure to 0.4MPa—→Pressure to 0.8MPa,temperature to 90℃—→Pressure to 1.0MPa,, Temperature to 135-140℃—→Rise the temperature to 1.05~1.28MPa—→Keep the temperature 30~60 minutes(depend on the glass thickness and quantity)—→Keep the pressure, freely decreasing the temperature to 90℃—→Temperature decrease to 45~55℃, release the air

Customer usage scenarios

dsda


Product detail pictures:

Hot Sale for Film Intercalaire Pvb - Light blue B113 / Opaque light blue B102 / Ford blue B118 / Ocean blue B105 – Baizan detail pictures


Related Product Guide:

To fulfill the customers' over-expected satisfaction , we have now our strong crew to provide our greatest general assistance which incorporates promoting, gross sales, planning, creation, top quality controlling, packing, warehousing and logistics for Hot Sale for Film Intercalaire Pvb - Light blue B113 / Opaque light blue B102 / Ford blue B118 / Ocean blue B105 – Baizan , The product will supply to all over the world, such as: Uruguay, Rotterdam, Lithuania, Our Company has qualified engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the items, Be sure to feel free to contact us.
  • The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Miguel from Comoros - 2017.08.28 16:02
    With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Sharon from Algeria - 2018.09.21 11:44
    Write your message here and send it to us